Javed Pathan

Duties include:

• Working Coke Area, Sulphur Area, Silo Coke & Sulphur Control Room, Central Control Room, Reclaimer And Bridge Crane Hvac unit
• Replace Compressor, Condenser Motor, Gas Charge, Pm & Cm Activity.
• Install Blower Barring, Blower Motor, AHU Flow Switch, Damper Motor, Fire Damper Actuator Motor, Contactor, Flow Switch, Ex Valve Replaced And Run Test.
• Maintenance, repair and service coke silo and sulphur silo Hvac unit
• Check and repair Hvac unit coke auto cutting pressure jet pump panel.
• Maintenance and repair hvac unit in reclaimer coke area.
• Check and repair hvac unit in Coker crane operator cabin and electrical substation also transformer room.
• Check and repair Hvac unit in depot control room and dust clean pressure jet pump control room.
• Responded to complaints about temperature problems in timely manner.
• Replaced electrical motors and HVAC systems up to 460 volts after main disconnect.
• Repaired and replaced condensers, compressors, pumps and valves.
• Troubleshot and repaired HVAC and refrigeration equipment.
• Disassembled units, repaired broken components and restored them to operating condition.
• Serviced electrical, mechanical and microprocessor controls.
• Assessed accuracy of HVAC and refrigeration PM procedures and gave feedback to management.
• Retained careful and thorough maintenance and repair records.
• Supervised 1-5 maintenance contractors.
• Building automation controls
• Learned and adapted quickly to new technology and software applications.
• Developed strong communication and organizational skills through working on group projects.
• Proven ability to develop and implement creative solutions to complex problems.
• Used critical thinking to break down problems, evaluate solutions and make decisions.
• Excellent communication skills, both verbal and written.
• Worked well in team setting, providing support and guidance.
• Frequently inspected production area to verify proper equipment operation

Duties include:

• Worked In T ank Farm Area, Utility Area, palace, Thermax Vapor Absorption Chiller
• Repair of all refrigeration and A/C package units
• Repair And Service Burner In Thermax Chiller
• Service And Repair Evaporator And Condenser Tube And Cell
• Service And Repair Vacuum Pump In Thermax Chiller Dally Monitoring Vacuum Pump Running Status, Child Water Pump Service And Repair, Calling Tower Service And Repair
• Changed compressors,contactor's,transformers capacitor,blower wheels and pm services.
• Removed and replaced bearings on condenser fan motors etc.
• Work in Thermax Vaporizer System Maintenance Operation and Service.
• Service Condenser, Burner, Absorber, Vacuum Pump Programming and Control Connection.
• Resolved problems, improved operations and provided exceptional service.
• Check and Maintain Substation, Ro, Fire Fighting Equipment, Electrical Switch Room, STP Plant and Child water pump.
• Maintained clean and well-organized production areas to avoid violations or unnecessary work delays due to hazards or inefficient layouts
• Frequently inspected production area to verify proper equipment operation
• Maintained overall safe work environment with employee training programs and enforcement of safety procedures
• Collected, arranged, and input information into database system
• Replace Compressor, Condenser Motor, Gas Charge, Pm & Cm Activity.
• Install Blower Barring, Blower Motor, Ahu Flow Switch, Damper Motor, Fire Damper Actuator Motor, Contactor, Flow Switch, Ex Valve Replaced And Run Test Unit.

• Worked In Substation, Switchgear Room, Tank Farm, Well Head Area
• Prepared reports and studies to resolve open technical issues.
• Promoted positive solutions for preventive maintenance, equipment repair and component fabrication to match specifications.
• Repaired and installed split systems, chillers and boilers.
• Designed HVAC systems and specified components for successful installation and operation.
• Compiled operational, performance and safety data on HVAC and support systems.
• Installed HVAC system expansions, discharge valves, air ducts, dampers, and stokers.
• Repaired, replaced and serviced both residential and commercial HVAC equipment, components, and wiring.
• Used technical skills, tools, and techniques like soldering to repair parts.
• Inspected cooling systems and identified potential problems.
• Repaired and replaced faulty motors, blowers, switches and compressor units.
• Repaired and maintained residential and commercial heating, air conditioning and refrigeration systems.
• Installed new air conditioning, heating and refrigeration systems according to manufacturer's specifications and local codes.
• Installed, connected and adjusted thermostats, humidistats and timers for optimal performance.
• Maintained compliance with company policies, objectives, and communication goals
• Maintained clean and well-organized production areas to avoid violations or unnecessary work delays due to hazards or inefficient layouts

• Worked In Well Head, Substation, Manifold, Control Room Area
• Checked equipment to determine if maintenance was required.
• Replaced Compressor, Condenser Motor, Gas Charge, Pm & Cm Activity.
• Install Blower Barring, Blower Motor, Ahu Flow Switch, Damper Motor, Fire Damper Actuator Motor, Contactor, Flow Switch, Ex Valve Replaced And Run Test.
• Handled issues with relative ease by implementing best practices and applying critical thinking skills to find best solutions.
• Evaluated incoming materials for quality and amounts ordered.
• Interacted with employees to demonstrate high standards and mitigate issues effectively.
• Established clear priorities and production quality standards.
• Reviewed project details to specify correct materials and equipment for job sites.
• Inspected completed work to verify quality standards and compliance with criteria.
• Conducted monthly meetings with employees to discuss safety issues, status and development.
• Monitored usage of supplies and materials to establish cost effective operations.
• Addressed issues with employees and customers to manage healthy conflict resolutions.
• Trained workers in proper methods, equipment operation and safety procedures.
• Prepared and submitted reports on job progress and safety conditions to upper management.
• Inspected equipment and tools used for safe operation.
• Managed efficient teams of up to 12 employees
• Monitored equipment, tools and system upgrades to compile data into detailed reports for upper management
• Monitored equipment, tools and system upgrades to compile data into detailed reports for upper management.
• Scheduled and oversaw maintenance, repair and installation activities.

• Worked In Tank Farm, Sulphur, Ship Yard, TR, Office Building, Offshore Platform And Burj Oil Refinery
• Working as Senior Hvac Foreman With 8 skill Technician and 4 helper.
• Covering Tank Farm, Liquid Birth, sulphur and Substation Area.
• Covering Offshore Dol-01 and Dol-2, maintenance, repair, and replace of any damage, broken, disconnect parts of equipment.
• Installed new systems and parts with efficient approach.
• Repaired components, systems and machines to control costs.
• Working in TR-01 to TR-04 inspect operator room, Hvac repair of any compline, carry Out Pm Activity.
• Regularly inspect temperature setting make records.
• Dally make check list records and file, regular inspect Hvac Unit and Avoid any Failure.
• Clane Filer Check Blower Motor, Belt Alignment, Calling Coil Condition if Required make clean.

• Worked In Tank Fram, Gas Plant, Work Shop, Well Control Room, Substation Area
• Working as Hvac Foreman In Rastanurra and Qutif Saudi Aramco Workshop.
• Inspect Well Head Control Room Hvac Unit and Repair.
• Repair Tank Farm Control Room Hvac System, Change Compressor, Gas charge, Service Unit.
• Always Inspect, Monitor, and Repair turbine cooling system.
• Repair Main Control Room Hvac Unit, Service, and temperature redding.
• Repair Control Panel Compact Hvac Chiller, Service and Gas Charge if needed.
• Monitor all Operator Cabin Ac unit if need repair or service immediate tack Action.
• Managed efficient teams of up to 28 employees.
• Monitored equipment, tools and system upgrades to compile data into detailed reports for upper management.
• Monitored priorities and liaised between maintenance team and management, delegating tasks to complete on time

• Worked In Control Room, Refinery, Substation, Tank Farm, Office Main Building, Main Control Room, Work Shop Area
• Replace Compressor, Condenser Motor, Gas Charge, Pm & Cm Activity.
• Install Blower Barring, Blower Motor, AHU Flow Switch, Damper Motor, Fire Damper Actuator Motor, Contactor, Flow Switch, Ex Valve Replaced And Run Test Unit.
• Checked equipment to determine if maintenance was required.
• Handled issues with relative ease by implementing best practices and applying critical thinking skills to find best solutions.
• Reworked positions and workflow based on individual abilities and production targets.
• Monitored job progress and performance of employees or contractors to complete projects prior to deadlines.
• Administered disciplinary actions to workers violating safety regulations and company policies.
• Inspected equipment and tools used for safe operation.
• Supervised training of new construction and extraction workers on safety practices and procedures.
• Created and implemented plans to maximize efficiency of workers.
• Sourced suppliers and purchased necessary materials for work.
• Checked equipment to determine if maintenance was required
• Trained workers in proper methods, equipment operation and safety procedures
• Sourced suppliers and purchased necessary materials for work
• Devised and implemented safety protocols to reduce risks on construction and extraction sites
• Prepared and submitted reports on job progress and safety conditions to upper management