Anas Abdou
SENIOR ELECTRICAL TECHNICIAN
Muscat
Summary
- Experienced Supervisor leading team members on-time job completion. Assign tasks, train employees, provide feedback, mediate interpersonal conflicts and implement company procedures. Excellent communication and listening skills. Provide leadership and vision which drives teams to meet goals.
- Hard-working Supervisor with exceptional experience leading teams, delivering results and exceeding expectations. Creative and motivated leader adept at utilizing exceptional design and planning strengths to accomplish complex projects. Skilled in teaching new concepts and best practice strategies.
- Dynamic Electrical Technician skilled in troubleshooting, overhauls, installations, adjustments and repairs on variety of electronic equipment. Licensed electrician in Oman with over 14 years of experience in appliance service.
Overview
15
15
years of professional experience
3
3
years of post-secondary education
2
2
Languages
Work History
Supervisor
MEMCO Sohar
Sohar
12.2020 - 01.2023
- Water Transmission System from Sohar to Dhahirah Governorte -Supervision of Installation of all electro-mechanical work for pumping stations such As MV switch-gears, LV switch-gears, Soft starter, pumps, motors, cables, EOT crane, Surge vessels protection system for 4 Main pump stations ( IWPP, SOHAR IR, MPS1, MPS2) -Supervision of Installation Electro-chlorination System for 3 stations such As the cable trays, all the equipments and finding solutions for all problems we had
- Created successful work schedules for each team member to maintain deadlines and fully staff shifts.
- Collaborated with management and fellow supervisors to organize operations and achieve demanding schedule targets.
- Initiated onsite safety program and properly trained team members to decrease injuries.
- Trained new team members on site policies and procedures.
- Enhanced communication between construction management and personnel to facilitate smooth project completion.
Supervisor & Senior Electrical Technician
MEMCO
Ad Dakhiliyah
01.2019 - 01.2020
- Upgrading Water supply stations -Upgrading for AUCOM soft starter in three stations and installing high voltage cables and dining indoor termination for the motors & soft starter for 3 pump stations - Installing Electro-chlorination System in 4 stations - Supervision of Installation the cable trays and all the equipments and finding solutions for all problems we had
- Mentored newly hired employees on operating equipment and safety and developed training manual to use for reference.
- Enforced rules and regulations outlined in company manual to set forth expectations comprehensibly and consistently.
- Achieved results by working with staff to meet established targets.
- Applied strong leadership talents and problem-solving skills to maintain team efficiency and organize workflows.
- Created successful work schedules for each team member to maintain deadlines and fully staff shifts.
Senior Electrical Technician
MEMCO
Al batinah
01.2018 - 01.2019
- Upgrading the control and monitoring system for several pumping stations and replacing the old PLC panels with new ones -Dismantling all connections from the old PLC panels and marking all the wires to draw up a diagram due to the lack of diagrams and setting a new one based on the old PLC programming
- Removing the old PLC panels and building new supports for the new PLC panels and put them in their place
- Inserting cables and connecting the wires to the new PLC panels -Operation and auditing of all equipment as ensuring its efficient operation
- Installed electrical wiring through conduits and holes in both flooring and walls.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Tested wiring and other system parts for electrical flow and function.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
- Updated hardware and software platforms by implementing automation and efficiency improvements.
- Estimated numerical length of runs during new service installations.
- Worked to create safe, low-cost and dependable designs.
Supervisor & Senior Electrical Technician
MEMCO Qurayyat
Qurayyat
01.2017 - 01.2018
- Qurayyat Pump station (PBS2) To Deem Reservoir In Muscat Governorate (Wadi
- Dayqah Water Supply Schem)
- I worked supervision with full responsibility in installing ABB switch gear and ABB
- VFD and commissioning of pumps, valves, Surge vessels protection system, tanker filling Station, instrumentation, and Designing and preparing all SCADA control panels wiring drawing by using ABB hardware, according to IES codes, and all associated LV works, doing high voltage termination indoor for the motors, VFD and switch gear and fixing a solar system for inverter to generator 230V AC to operating
- PLC
- Mentored newly hired employees on operating equipment and safety and developed training manual to use for reference.
- Installed electrical wiring through conduits and holes in both flooring and walls.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Tested wiring and other system parts for electrical flow and function.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Installed electrical cables for power, controls, and lighting.
- Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
- Operated and maintained electronic transmitting and receiving equipment.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
Team Leader
MEMCO Oman
Oman
01.2015 - 01.2017
- Tanker Filling Station Upgrading (vending machine using smart card)
- Project in all locations in Oman, 375 Stations, which is fully MEP and
- Telecommunication work, my job description was leading the team to installation all project equipment operating and maintenance all telecommunication system
- Finding the solutions to system problems (hardware & software)
- Conducted training and mentored team members to promote productivity and commitment to friendly service.
- Mentored and guided employees to foster proper completion of assigned duties.
- Managed leave requests and absences and arranged covers to facilitate smooth flow of operations.
- Worked with team to identify areas of improvement and devised solutions based on findings.
- Supervised team members to confirm compliance with set procedures and quality requirements.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
- Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
- Worked to create safe, low-cost and dependable designs.
Electrical Technician
MEMCO
Khasab
01.2014 - 01.2015
- Khasab Air Force Base SEWAGE TREATMENT PLANT (STP) (Repair & operation)
- Operating and maintenance mechanical and electrical equipment of SEWAGE
- TREATMENT PLANT (STP) for Khasab air force base for ministry of defense
- Replacement some mechanical and electrical parts and fix some others
- Tested, troubleshot, and calibrated equipment in shop and field.
- Disconnected and removed motors and pumps.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
- Tested wiring and other system parts for electrical flow and function.
- Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Inspected and tested machinery and equipment to diagnose malfunctions.
- Cleaned and lubricated components to maintain optimal performance.
- Disassembled broken, defective, and worn out equipment to aid with repairs.
- Operated variety of power tools and hand tools.
- Installed new equipment in multiple customer locations.
- Followed safety protocols on job sites.
- Maintained tools and equipment in good working condition.
- Trained customers on how to use, configure and maintain installed equipment.
- Maintained detailed installation records for customer and company use.
- Answered customer questions and helped resolve various concerns.
Electrical Technician & Supervisor
MEMCO
Al khalof
01.2014 - 01.2015
- Osmosis Plant (RO)
- Construction of new RO plant form veolia , construction of scada system, installing the electrical and mechanical equipments
- Startup and supervision of operation and maintenance
- Installed electrical conduit and wiring for power, controls, and lighting.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Tested wiring and other system parts for electrical flow and function.
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
- Operated and maintained electronic transmitting and receiving equipment.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
Electrical Technician
MEMCO
Ash Sharqiyah
01.2013 - 01.2014
- Construction and Installation of Booster Pump
- Stations and Other Associated Works at 5 Locations
- Building control panels and operating for the sites Supply, installation, testing and commissioning of all electro-mechanical work for the two centrifugal pumps with motors & Variable
- Frequency Drive and other related accessories with a capacity ofl/s each at 30 meters head for five pumping stations.
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
- Installed electrical wiring through conduits and holes in both flooring and walls.
- Tested wiring and other system parts for electrical flow and function.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Installed electrical cabels for power, controls, and lighting.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
- Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Operated and maintained electronic transmitting and receiving equipment.
- Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
- Conferred with engineers and designers to investigate and solve failure issues.
Electrical Technician
MEMCO
Barkaa
01.2012 - 01.2012
- Supply, Install and Commission Control System for
- Controlling & Monitoring total Dissolved Solids in the
- Product Water from Desalination Plants
- Managing and preparing all engineering demands, Operation and control philosophy, Piping and Instruments Diagram, Inputs & Outputs signals List, Designing system architecture drawing as tender specifications, commissioning all the control system
- Programming and commissioning the implemented control system by using AC800F ABB hardware, in integrating with
- DigiVis SCADA software
- Designing and preparing all SCADA control panels wiring drawing by using ABB hardware, according to IES codes.
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
- Installed electrical wiring through conduits and holes in both flooring and walls.
- Tested wiring and other system parts for electrical flow and function.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
- Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Operated and maintained electronic transmitting and receiving equipment.
- Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
Electrical Technician
MEMCO
Qurayyat
01.2011 - 01.2012
- Water supply station
- Installation of all electro-mechanical work for pumping stations such As pumps, motors, , cables, EOT crane, Surge vessels protection system and Designing and preparing all SCADA control panels wiring drawing by using ABB hardware, according to IES codes.
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
- Installed electrical cabels for power, controls, and lighting.
- Tested wiring and other system parts for electrical flow and function.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Obtained measurements and readings using volt and ohm meters, meggers, IC testers and dial indicators.
- Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Conferred with engineers and designers to investigate and solve failure issues.
Electrical Technician
MEMCO
Ad Dakhiliyah
01.2010 - 01.2011
- Water supply stations
- I worked with full responsibility in installing ABB switch gear and AUCOM soft starter in three stations and doing high voltage termination indoor for the motors & soft starter :
- MPS 1650 KW, 11 KV – PBS1 1250 KW, 11KV- PBS2 1250 KW,11 KV
- Installing
- Siemens switch gear and ABB AC800 VFD in two stations:
- PBS3 800 KW, 415 volt, PBS4 500 KW, 415 volt
- Installing of junction boxes between soft starters, variable speed drives and SCADA panels in all projects regions:
- MPS, BPS-1, BPS-2, BPS-3 & BPS-4
- Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
- Installed electrical Cabels for power, controls, and lighting.
- Tested wiring and other system parts for electrical flow and function.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Disconnected and removed motors and pumps.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Operated and maintained electronic transmitting and receiving equipment.
- Conferred with engineers and designers to investigate and solve failure issues.
- Interpreted test information to resolve design-related problems.
- Interpreted scale drawings of new commissions to determine layout of materials and equipment.
Electrical Technician
MEMCO
Ash Sharqiyah
01.2008 - 01.2010
- Water supply stations -I worked with full responsibility as installer of switch gear and motor control center panels with 600 KW power capacities in Ash sharqiyah project (Pumping Water from Sur Desalination plant till almudahibi area
- Installing of auxiliary distribution panel in all compounds related to Ash sharqiyah project
- Fixing and installing of all auto feeder machines in each tanker stations
- Installing of junction boxes between MCC panels and SCADA system - Surge vessels control circuits maker
- Operating and maintenance of all project compounds for one year, which are including motors with power capacity from 15 KW, till 600 KW
- Supply, Install and Commission
- Control System for Controlling & Monitoring total Dissolved
- Solids in the Product Water from
- Installed electrical cabels for power, controls, and lighting.
- Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
- Tested, troubleshot, and calibrated equipment in shop and field.
- Tested wiring and other system parts for electrical flow and function.
- Inspected equipment for defects and safety hazards and completed necessary repairs.
- Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
- Conferred with engineers and designers to investigate and solve failure issues.
Education
Course - First Aider
Accurate Safety Training
Oman 12.2020 - 12.2020
Course - Awareness & Escape
Occupational
Oman 01.2017 - 01.2017
Course - Confined Space Entry
Occupational
Oman 01.2017 - 01.2017
Secondary School - Electrical Industrial
Secondary School Electrical Industrial
Damascus, Syria 08.2001 - 07.2004
Course - MV Joints & Terminations, Raychem
Raychem
Oman 10.2022 - 10.2022
Course - PLC SCADA HMI
Automation Vision
Oman 09.2022 - 09.2022
Course - ABB Instrumentation (Flowmeters) Training
ABB UK Factory
Oman 10.2022 - 10.2022
Skills
Ability to Work in a Teamundefined
Accomplishments
- Electrical Technician and sites supervisor contracting with more than 14 years experience in industrial projects in Oman
- Background of leadership on projects involving historical restoration
- Able to direct and mentor other technicians in installation, maintenance and repair of electrical wiring, equipment and fixtures
- Professional in designing and assembling control and power panels
- (Excellent as panel builder and rebuilding it).
Timeline
Course - MV Joints & Terminations, Raychem
Raychem
10.2022 - 10.2022
Course - ABB Instrumentation (Flowmeters) Training
ABB UK Factory
10.2022 - 10.2022
Course - PLC SCADA HMI
Automation Vision
09.2022 - 09.2022
Course - First Aider
Accurate Safety Training
12.2020 - 12.2020
Supervisor
MEMCO Sohar
12.2020 - 01.2023
Supervisor & Senior Electrical Technician
MEMCO
01.2019 - 01.2020
Senior Electrical Technician
MEMCO
01.2018 - 01.2019
Course - Awareness & Escape
Occupational
01.2017 - 01.2017
Course - Confined Space Entry
Occupational
01.2017 - 01.2017
Supervisor & Senior Electrical Technician
MEMCO Qurayyat
01.2017 - 01.2018
Team Leader
MEMCO Oman
01.2015 - 01.2017
Electrical Technician
MEMCO
01.2014 - 01.2015
Electrical Technician & Supervisor
MEMCO
01.2014 - 01.2015
Electrical Technician
MEMCO
01.2013 - 01.2014
Electrical Technician
MEMCO
01.2012 - 01.2012
Electrical Technician
MEMCO
01.2011 - 01.2012
Electrical Technician
MEMCO
01.2010 - 01.2011
Electrical Technician
MEMCO
01.2008 - 01.2010
Secondary School - Electrical Industrial
Secondary School Electrical Industrial
08.2001 - 07.2004
Similar Profiles
Ahmed Said AlshhehiAhmed Said Alshhehi
Researcher at Sohar UniversityResearcher at Sohar University
Amit Kumar UpadhyayAmit Kumar Upadhyay
Sr. Engineer (Electrical and Projects ) at Sohar AluminiumSr. Engineer (Electrical and Projects ) at Sohar Aluminium
Rekha BalamuruganRekha Balamurugan
Tamil Teacher at Sohar Tamil Mandram -Under Madras universityTamil Teacher at Sohar Tamil Mandram -Under Madras university